Steaming without a Steamer Part 1

I work almost exclusively with silk acid dyes for painting and dyeing silk. When I paint, I mix the dyes with water and apply with a brush to stretched silk (or not stretched, depending on the effect I want). Painted pieces, as well as various low immersion and tie dyed techniques, require the acid dyes to be steam set as the final step in the dyeing process. I don’t have a professional silk steamer, but here is my super low tech way of doing it.

Here’s a painted veil I made on my giant veil-stretcher.
After the painting is finished, I laid it out on plain newsprint. In this case, I used a lot of water-based resist mixed with black dye to make the lines, and this black resist can bleed through one layer of paper during steaming, so I put an addition layer over the areas I was most concerned about (not shown).
I rolled it up like a jelly roll. Baby Cat helped (and by “helped” I mean “got in the way”). The veil and paper are now a tube around 50″ long.
Next, I roll the jelly roll up like a cinnamon roll.
The cinnamon roll gets held together by a rubber band or two.
Now I have something that will fit in my canning pot-turned-veil steamer. Stay tuned for Part 2 in which I will show you the actual steamer set up.

The Geometry of Half Circle Veils

Three yards (108″, or about 2.75 m for the non-backwards metric-using nations of the world) is a standard length for belly dance veils . Thus, a 3 yard long half circle veil must have a radius of 54″.  It must be cut from 54″ wide silk in order to really be a half circle. Some veils marketed as half circles would more accurately be described as half ellipse, because they’ve been cut from 45″ wide silk.

I prefer concise language when it comes to these curved-edge veils, but I’ve also caved to the standard of titling my half ellipses as half circles so they come up in searches (always with the appropriate caveat in the description though).

A Picture is Worth a Thousand Words:

It’s geometry…

A true half circle veil in the standard 3 yard length is a LOT of fabric. There is ~17% less fabric in the half ellipse, and these two shapes do not move exactly the same.

How important these is to your dancing depends entirely on your veil work style. If you like the way a half-circle or half-ellipse veil drapes when it’s tucked into your costume, but otherwise treat the veil much as you would a rectangular veil, a half-ellipse may be just fine.

However, the half circle has the same amount and weight of fabric radiating out from the center point, so every point around the edge is going to pull outward with the same centrifugal force when you do something like a fast barrel turn. This means the true half circle veil will tend to stay open in all its glory during these moves–even more so if you select heavier 8 momme silk for this purpose.

On the other hand, if you are of shorter-than-average height, a 54″ wide veil will require more strength and finesse to avoid stepping on it. For us shorties, a 54″ veil (whether semicircular or rectangular) will be dragging the ground when our arms are extended straight out from our sides.

👋

Reason #472 why ebay sucks for artists

I only use ebay to sell my silk wares when I want to donate proceeds of a transaction to charity. I have to say, they do make it very easy to donate to a wide variety of charities; I wish etsy would support such a feature. I hoped to sell this one-of-a-kind swallowtail butterfly veil to support the Xerces Society for Invertebrate Conservation. Clearly, I don’t get the right traffic. 🙁